| Model | S-500-12 | S-500-15 | S-500-24 | S-500-36 | S-500-48 | ||
| Output | DC Voltage | 12V | 15V | 24V | 36V | 48V | |
| Voltage Tolerance | ±1% | ±1% | ±1% | ±1% | ±1% | ||
| Rated Current | 42A | 34A | 21A | 14A | 10.5A | ||
| Current Range | 0~42A | 0~34A | 0~21A | 0~14A | 0~10.5A | ||
| Rated Power | 500W | 500W | 500W | 500W | 500W | ||
| Ripple & Noise | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p | 240mVp-p | ||
| Voltage ADJ. range | 10.8~13.2V | 13.5~16.5V | 21.6~26.4V | 32.4~39.6V | 43.2~52.8V | ||
| Setup,rise time | 1.5s,50ms/230VAC | ||||||
| Hold up time | 20ms/230VAC | ||||||
| Input | Voltage Range | 180~264VAC, 255~370VDC | |||||
| Frequency | 47~63HZ | ||||||
| AC Current | 5.5A/230VAC | ||||||
| Efficiency | 84% | 84% | 87% | 86% | 87% | ||
| Inrush Current | Cold start 36A/230VAC | ||||||
| Leakage Current | < 3.5mA/240VAC | ||||||
| Function | Fan on/off control | RTH2.RTH3=≥55℃ FAN ON,≤50℃ FAN OFF | |||||
| Protection | Overload | Rated output power 105%~150% start over load protection | |||||
| protection type:Constant current limiting, recovers automatically after fault condition is removed. | |||||||
| Overvoltage | Protection type:Hiccup mode, recovers automatically after fault condition is removed | ||||||
| Overtemp | Protection type:Output voltage decline,recovers automatically after temperature fall | ||||||
| Environment | Working temp., humidity | -10℃~+60℃, 20%~90%RH non-condensing | |||||
| Storage temp., humidity | -20℃~+85℃, 10%~95%RH | ||||||
| Temp. Coefficient | ±0.03%/℃(0~45℃) | ||||||
| Withstand Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min., each along X, Y, Z axes | ||||||
| Safety | Withstand Voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
| Isolated Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25℃/70%RH | ||||||
| Compliance | Safety Standard | Compliance to UL1012 | |||||
| EMC Standard | Compliance to EN55022, Class B, EN61000-6-1 | ||||||
| Others | Dimension | 241x124x65mm(LxWxH) | |||||
| Weight/packing | 1.5kg/12pcs/18kg | ||||||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
||||||